SHIMALI PAINT Pro Shyne Exterior Wall Primer is a water-thinnable base coat offering superior brightness, excellent adhesion and sealing properties, along with good resistance to wall alkalinity. Endowed with fast-drying ability, it is used for priming plastered walls, concrete, brickwork, etc. Its low-VOC formulation makes it an ideal base coat. It holds high resistance to algae and fungi, and is applicable for all water-based products, giving excellent coverage and protection to interior spaces.
CLEANING: The surface to be primed should be sound, clean, dry, and free from dust, dirt, loose particles, grease, etc. This should be done by wire brushing and cleaning with water. All minor cracks and defects should be repaired. All surface undulations should be leveled with thin coats of SHIMLAI PAINT wall putty and allowed to dry. All areas affected by algae, fungus, or efflorescence should also be suitably treated.
APPLICATION: SHIMLAI PAINT Pro Shyne Exterior Wall Primer should be applied by diluting with water in the ratio of 1:1, apply with brush or spray. Allow the surface to dry for 4-6 hours.
SAFETY PRECAUTIONS: For the best performance of the paint, ensure proper washing and cleaning of all algae and fungal growth. Stir the paint thoroughly and strain before use. Store SHIMLAI PAINT Pro Shyne Interior Wall Primer in a cool and dry place. Keep the container tightly closed when not in use. Wash the brush/equipment with water immediately after use.
LEAD CONTENTS DOES NOT EXCEED 90PPM. NO ADDED MERCURY, ARSENIC AND CHROMIUM
